How do you do a walk back tune?
Steps for walk back tuning a compound bow Mark a bullseye in the middle of the line and at the top section of the target wall. With a dialed in 20 yard pin, take a shot at the bullseye. Now walk back to 30 yards and take another shot at the bullseye with the 20 yard pin. Do this same process at 35 and 40 yards.
What distance should a broadhead tune be?
Select a distance you are comfortable and confident shooting. You don’t need to be 100 yards away for this – I recommend 20 or 30 yards. First, shoot a broadhead arrow at the target (be sure you are using a target specifically designed for broadheads).
How do I adjust the rest on my broadheads?
Tuning Your Broadheads
- If your broadheads hit low, raise your arrow rest.
- If your broadheads hit high, lower your rest.
- If they’re hitting left, move your rest to the right.
- If they impact right, move your left.
What is a walk back tune?
Walk back tuning is a process where you will shoot arrows at a single point on a target, but your distance increases from the target while still using the same pin. For example, you shoot at 20, 30, and 40 yards while still using your 20-yard pin.
Is my bow out of tune?
What you’re looking for is the perfect “bullet hole.” You want to see where the point impacted and the fletching should be going right through that hole in a straight line. If the fletching tears are high, low, left or right, you need to make adjustments. The bow is out of tune.
What is a French tune?
WHAT IS FRENCH TUNING. French tuning or modified French tuning as it is often called is a very easy way to determine the center shot of your bow. The French Tuning method allows for adjustments to both your site and your rest to achieve center shot. Both methods are considered a type of bow tuning and not arrow tuning.
Should you paper tune broadheads?
We suggest following the “broadhead tuning your bow through paper” technique. If you use the second method, “broadhead tuning your bow at the range,” you may or may not achieve the best broadhead flight. You can force a broadhead to hit the same POI on an untuned/untimed bow and still not have the best arrow flight.
How do you get broadheads to hit with field points?
How to Broadhead Tune your Bow at the Range
- Shoot your broadhead arrow at a bullseye from 20 yards.
- Shoot your field point arrow at the same bullseye from 20 yards.
- Repeat the process and observe the results.
- Adjust your bow until you reach the same POI or point of impact.
What is bare shaft tuning?
Bare shaft tuning is where one shoots arrows stripped of fletchings in order to magnify any minor kinks in arrow flight which are caused by your bow. Without fletchings, the arrow’s flight wont be corrected as it flies down range by the fletchings.
